A Nerf Longshot with a Nerf Vulcan front barrel and a Nerf Deploy stock. I now have 3 extra tactical rails on my Longshot. It looked a little different in my head but I guess it turned out ok. At least it shoots far. I need some paint scheme ideas.
While inside I decided to add a second spring from a BBB and make some small improvements. With everything done it will be getting ranges of about 80 feet. Its capable of more but the short stock barrel hurts ranges, some darts spin out the gun because of too much power.
Add a second spring, some foam should be added to the tip of the plunger because it's gonna be loud.
After removing the restrictor I filled in the dead space with a piece of cpvc wrapped in electrical tape.
I filled the hole in the barrel with hot glue
I wanted to use the tactical rail shield with this gun but the Vulcan front is too wide, so needed to make it thinner. I took off the side panels and trimmed them down.
Trimmed on the left, un-trimmed on the right. I will cut the one on the right on the black line. Now the shield will fit, a little tight but it fits.
A lot will need to be cut from the Vulcan front barrel before it will fit the Longshot.
The Deploy stock is way too wide for the Longshot, there is a lot of glue holding this stock on.
A little disappointed with how it looks. Don't be surprised if you see this on ebay.